# btsync_bin="/path/to/btsync" # Default is "/usr/local/sbin/btsync" # btsync_user="username" # Default is "root" # To enable BTSync, add this line to your /etc/rc.conf: Copy and paste the text from below: #!/bin/sh cd /conf/base/etc/rc.dĪfter the last command you’ll be able to edit the new btsync file. This script is slightly modified from forum contributor Dalys. To make things easier, lets make Sync run on startup.įor the next few steps, you’ll need to make modifications to the file system. Change directories to the sync folder: cd /mnt/NAS/syncĮxtract the files: tar -xzf btsync_freebsd_圆4.tar.gz If you are comfortable with SSH, you can do that instead. If you want to unlock the real potential of your NAS drive, then read on. If all you want is NAS storage, you can stop here. Your volume should now appear as network storage to any computer on your local network. Give the CIFS share a name, select the “data” folder for the path and allow guest access. On the left column, navigate to Sharing > CIFS shares > Add Windows CIFS share. I chose CIFS because it works with both Mac and PCs. The next step is setting up a CIFS share. Call the first one “data” and the second one “sync”. Create two new datasets for your new volume. You’ll need a few new datasets before moving forward. Check all the boxes, select “set permissions recursively”, and click “change”. Find the volume you just created and click on “change permissions”. Now lets set the proper permissions for this new volume. There are other options here that I am skipping, and I’d encourage you to read up if you are interested in more advance options. Select your disks, provide a volume name (I’m using the name “NAS” for this tutorial), select ZFS and add the volume. Go to: Storage > Volumes > Volume Manager. This will wipe all data, so backup anything you want to keep. Next you need to configure your hard drives. To do this, navigate to the left column and select: Account > Admin Account > Change password. If you click on it, it will tell you to set your admin password. You should see an alert in the top right. This will bring you to the GUI that you see pictured below. Enter that IP address into a browser on a different computer on the same network. This will take a few minutes.Īfter FreeNAS is done booting up, you will see a few options and an IP address/URL. Set your BIOS to boot to that thumb drive by default and then let your computer boot up. Then plug your thumb drive into your computer and turn it on. Make sure you have an ethernet cable running from your computer to your router. Copy the image to your thumb drive using the instructions on this page. This tutorial was written using FreeNAS-8.3.1-RELEASE-p2. This is actually a lot easier than you may think. At least one hard drive in the computerįirst you need to get FreeNAS up and running on your old machine.An old computer with a 64 bit processor (recommended).Here is what you’ll need for this project: Only people with access to your “Secret” can store your data. Sync never stores your data on a stranger’s computer. In a nutshell, it allows you to sync folders between machines using P2P. If you aren’t familiar with BitTorrent Sync, you can read up about it here. It may not play Crysis, but it will provide you with a plethora of options including FTP, redundant storage, and most importantly, BitTorrent Sync. Give it to your parents? Reenact your favorite scene from Office Space? How about you turn that piece of junk into a Network Attached Storage (NAS) device running BitTorrent Sync. Now you have to decide what to do with that old computer.
0 Comments
Leave a Reply. |